The fridge is probably the most used appliance in most people’s homes. Like any other appliance, it needs to be cleaned regularly, or bad odors might start to develop.
Thankfully, cleaning your refrigerator is a simple task; all you need are a few cleaning products, a dry cloth or two, and a cooler to put your food in while you are cleaning your fridge, and you’re good to go.
Let’s get started.
The first step is to remove all of your food from your fridge and freezer and put it into coolers to keep it cold while you’re cleaning your fridge and freezer out.
Next, turn your refrigerator off so that the freezer can defrost. Leave the freezer door open while you are cleaning the fridge.
The next step is to remove all the shelves and drawers from the refrigerator and then wash them with hot, soapy water. Any glass components in your fridge must be left for a while to come up to room temperature before you run them under hot water, as they can crack easily.
Once cleaned, place them somewhere to dry (inside or outside) while you’re cleaning your fridge out.
The next step is to clean the inside of your refrigerator. The best way to do this is to grab a damp cloth and a spray bottle of cleaner. You can either use a commercial cleaning product or make up a solution of 1 part baking soda to 7 parts water and put that into an empty spray bottle.
Once you’ve got your cleaning spray bottle, spray and wipe the inside of the fridge, making sure you get into all of the hard-to-reach places. To avoid having to re-clean parts of the fridge, start from the top and work your way down. At this point, you should also be able to clean the freezer out (using the same method).
Once you’ve cleaned your refrigerator, it’s a good idea to place an open small container of dry baking soda in the fridge, as this helps to absorb any odors – just remember to change it regularly.
Once your freezer has been cleaned, it’s a good idea to flush the drain out in case there is anything stuck in it. All you need to do is carefully pour down hot, soapy water or hot water and some of your baking-soda-based cleaner. If there is anything blocking the drain, you can dislodge it with a piece of wire.
Once your refrigerator is clean and dry, you can put the shelves and drawers back in – just give them a final dry with a clean cloth before doing so.
The next step to clean your refrigerator is to clean the gasket around the fridge door. You can use soapy water, a brush, and some cloths to do this, and if there are signs of mold, you can use a commercial bleach-based cleaner to get it off. Once cleaned, make sure you dry off the cleaning solution fully. If you have petroleum jelly, you can lightly coat the gasket to stop it from drying out.
Now that the inside of your fridge is sparkling clean, you can give the exterior a good clean. All you need to do is spray and wipe all the outside surfaces (including the top of the fridge), and if you have a stainless steel fridge, you can use a microfiber cloth with a little bit of rubbing alcohol to give it a good shine.
While you are going to the trouble of cleaning your fridge, it’s a good idea to also clean the refrigerator coils, as this will help your fridge operate better, which helps to extend the life of your fridge.
To clean the refrigerator coils, you need to:
While you have the refrigerator pulled out from the wall, it’s a good idea to clean the water drain pan if you have one. To clean the drain pan, simply give it a good clean with a damp cloth, and if there are signs of mold, use a bleach-based cleaner. Once cleaned, you can put your refrigerator back against the wall.
Now that your fridge is clean, the final step is to put your food back into your fridge and freezer and turn the power back on. When putting your food back into the fridge, be sure to throw away any expired food and give all of your containers and jars a quick wipe. Finally, it’s important to remember to give your refrigerator a regular clean (especially the door gaskets), as this will help it run more efficiently and for much longer.
The F9 E1 error code means your Whirlpool washer is taking longer to drain than…
Has your Frigidaire dishwasher suddenly started displaying blinking, flashing lights? While it might look alarming,…
If your front load or top load LG washer displays the UE error code, it…
There are two phases to replacing an over-the-range microwave with a range hood. First, you…
The stench of something burnt coming from your microwave can be incredibly off-putting. It is…
If the ice maker on your Bosch refrigerator is not working, this handy guide will…
Leave a Comment