If your dryer is producing excessive condensation, the issue can be fixed by clearing out the dryer’s ventilation. When the ventilation is blocked, the air is unable to be properly ventilated, which causes condensation. Fixing the issue may require cleaning the lint filter, disassembling the dryer, or using a ventilation cleaning kit to clean the duct. However, the first thing to check is the placement of the dryer.
If the dryer does not have any ventilation or is located in a cold space like a garage, it will most likely lead to condensation. If the dryer’s ventilation does not have enough space, it may be kinked, squashed, or blocked, causing the condensation issue.
To fix the condensation issue, the dryer may need to be moved, or ventilation or an extractor fan may need to be installed.
The dryer’s lint filter (lint trap) should be cleaned after every cycle. If the lint trap is not frequently cleaned, the lint will build up and clog the ventilation.
The dryer’s ventilation tube is typically at the back of the dryer, where it connects it to the ventilation duct. Depending on the dryer, the ventilation tube may be attached to another lint filter. If your dryer does not have a ventilation tube, move on to the next step.
Over time, even if you frequently clean the lint filter, lint can accumulate inside the dryer, especially around the blower wheel and ventilation tube at the back of it. If you haven’t already, a rear panel on the dryer should be removed to clean the lint from inside the dryer. If a rear panel cannot be removed, the dryer may need to be disassembled, starting with the front panel and then the top panel.
Typically, most households have a dryer ventilation duct that runs from inside the home to the outside. Depending on how often the dryer is used, the duct should be cleaned every 1-2 years to prevent fires from starting. While not as serious as the fire risk, not cleaning the duct can also lead to condensation issues.
Experts recommend a dryer duct that is made of rigid metal, as a rigid metal duct has a smooth interior that encourages the flow of air and lint. Rigid metal is also less of a fire risk. If your duct is made of something else, perhaps vinyl or plastic, it is recommended to replace the duct with rigid metal. Replacing the duct could also solve the condensation problem as the duct may be prone to lint blockages that cause condensation (as well as being a fire risk).
The dryer duct can be cleaned with a dryer vent cleaning kit, which should come with an extendable and flexible brush designed for cleaning dryer ducts. Another option is to have it professionally cleaned.
One final thing to check is that the dryer duct opens to the outside without impediments. This is particularly important for dryer ducts with flaps on the end that open when the air pressure is expelled from the dryer. However, it is also important to check that nothing is blocking the dryer duct as well.
If you have followed all of the steps above, you should now have a strong and continuous flow of air coming out of the dryer duct. The condensation issue should also be solved.
Condensation is caused by warm and moist air that encounters colder air or a surface. If your dryer is producing condensation, it is most likely because of a ventilation blockage that isn’t allowing air to flow properly out of the dryer. The dryer’s lint filter, inside, ventilation tube, and ventilation duct should be cleaned to fix the issue.
The F9 E1 error code means your Whirlpool washer is taking longer to drain than…
Has your Frigidaire dishwasher suddenly started displaying blinking, flashing lights? While it might look alarming,…
If your front load or top load LG washer displays the UE error code, it…
There are two phases to replacing an over-the-range microwave with a range hood. First, you…
The stench of something burnt coming from your microwave can be incredibly off-putting. It is…
If the ice maker on your Bosch refrigerator is not working, this handy guide will…
Leave a Comment